X3 Evolution Satellite Router

Superior Quality of Service and Network Performance iDirect’s sophisticated Group QoS advanced traffic prioritization dynamically balances the demands of different applications according to their needs and bandwidth availability, across multiple sites and user sub-networks. Features such as TCP and HTTP acceleration, in addition to local DNS caching, increase performance and maximize user experience. Seamless Terrestrial Integration An integrated satellite modem and router with Ethernet interface, combined with a native IP architecture, ensuring easy integration of satellite-delivered connectivity into almost any data network. Support for a rich set of IP protocols and features such as TCP, UDP, multicasting, NAT and DHCP guarantee compatibility with a wide range of applications and user needs, including corporate network extension, point of sale, SCADA, telemetry, multimedia and Internet cafés. Flexibility to Meet Changing Requirements Over-the-air upgrade options can add strong data encryption or extend the remote’s capabilities allowing operators to customize Evolution X3 to meet technical and budget requirements. Simple, Intuitive Network Management The Evolution router is easily configured, monitored, and controlled through the iVantage™ network management system, a complete suite of software-based tools for configuring, monitoring and controlling satellite networks from one location.

NETWORK CONFIGURATION Network Topology Star (DVB-S2/ACM downstream + Multi Frequency D-TDMA upstream) Modulation Downstream: QPSK, 8PSK, 16APSK Upstream: BPSK, QPSK, 8PSK Maximum Carrier Rates Downstream (DVB-S2/ACM) Upstream (D-TDMA) Symbol rate 45 Msps 5 Msps Info Rate 156 Mbps1 8 Mbps2 Notes: 116APSK 8/9 FEC 2QPSK .793 FEC, unlimited NMS The processing capability of an individual remote will be less than the stated maximum carrier size FEC Downstream: LDPC QPSK 1/4-8/9, 8PSK 2/3-8/9, 16APSK 3/4-8/9 Upstream: Turbo BPSK .431-.793, QPSK .533-.793, 8PSK .660 Eb/No For full list please refer to the latest iDirect Link Budget Analysis Guide INTERFACES Satcom Interfaces TxIF: Type-F, 950–1700MHz, Composite Power +7dBm / -35dBm RxIF: Type-F, 950–2150MHz, Composite Power -5dBm / -65dBm Available BUC Power (IFL) +24V, 85W max. supporting BUCs up to 5W (120W PSU) Available LNB Power (IFL) +19.0V (Nominal) / +14V (Nominal), 300mA (DiSEqC) 22KHz DiSEqC tone 10 MHz Reference Software controllable on Tx and Rx IF ports Data Interfaces LAN: 10/100 Ethernet, 802.1q VLAN RS-232: RJ45 (Console connection) Protocols Supported TCP, UDP, ACL, ICMP, IGMP, RIP Ver2, BGP*, Static Routes, NAT, DHCP, DHCP Helper, Local DNS Caching, cRTP and GRE Traffic Engineering Group QoS, QoS (Priority Queuing and CBWFQ), Strict Priority Queuing, Application Based QoS, Minimum CIR, CIR (Static and Dynamic), Rate Limiting Other Features Built-in Automatic Uplink Power, Frequency and Timing Control, Authentication, AES-256 encryption**

MECHANICAL/ENVIRONMENTAL Size W 11.5 in (29.2 cm) x D 9.9 in (D25.1 cm) x H 2 in (5.1cm) Weight 4.4 lbs (1.95 Kg) Operating Temperature 0˚ to +45˚C (32˚ to +113˚F) at Sea Level with temperature gradient of 5˚C per 10mins Humidity Max 90% non-condensing humidity Input Voltage 100–240 VAC Single Phase, 50–60 Hz, 2A max at 90 VAC, 1A max at 240 VAC Radio Standards EN 301-428 v1.3.1 — Ku-Band System Level Specification EN 301-443 v1.3.1 — C-Band System Level Specification Safety Standards Complies with IEC 60950, EN 60950-1, UL 60950-1, CSA C22.2 No.60950-1-03 Emission Standard Complies with EN 55022 Class B, FCC Part 15 Class B, CISPR 22 Class B, EN 61000-3-2, EN 61000-3-3 EMC/Immunity Standard Complies with EN 55024, EN 301-489-1, EN 301-489-12, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 Certification FCC, CE, and RoHS Compliant * Subject to future software release ** Optional